Arrow Safety

PROPER ARROW SPINE SELECTION

  • Choosing the correct arrow spine is essential for safety and performance. Using an arrow that is too weak (under‑spined) for your draw weight and draw length increases the risk of shaft failure and can cause serious injury or damage to equipment.
  • Our spine chart is calibrated to match our shafts to common draw weights and lengths. Always consult the chart and select an arrow spine appropriate for your setup — safety begins with the right arrow choice.

INSPECT EVERY ARROW BEFORE SHOOTING

  • Inspect each complete arrow before every session. Look for signs of impact, cracks, nicks, or other damage to the shaft, nock, insert, and point. Damaged arrows must never be shot — they can fail unexpectedly and cause injury.
  • This check is especially important if you shoot in groups, practice frequently, or participate in tournaments where arrows and nocks are more likely to be dinged or damaged.

HOW TO PERFORM A THOROUGH ARROW INSPECTION

  1. Wear eye protection while inspecting — safety first.
  2. Visually scan the full length of the shaft for any gouges, cracks, or soft spots. Check nocks and inserts closely for cracks or deformation.
  3. Flex test:
    • Grasp the arrow near each end and form a gentle 1–2" arc. Listen and feel for any popping, cracking, or rough spots.
    • Rotate the shaft and repeat so you check all sides.
  4. Twist test:
    • Hold the shaft near the center and gently twist. Listen and feel for noises or roughness that indicate internal damage.
  5. Inspect nocks and points:
    • Ensure the nock is intact, seats properly, and is free from cracks. Inspect the point/insert for tight fit and damage.
  6. If you find any doubt or defect, retire the shaft immediately — do not shoot it.

SHAFT CUTTING WARNING

  • Only cut carbon shafts with tools designed for carbon arrows (carbon shaft cutters or saws at the correct RPM). Using the wrong cutter or incorrect technique can splinter or delaminate the shaft and make it unsafe to shoot.

GENERAL SAFETY REMINDERS

  • Never point a bow at a person, animal, or property. Always verify your shooting lane and what lies beyond the target — arrows can deflect unpredictably from hard surfaces.
  • Have a qualified technician check your bow setup and arrow length. An arrow that is too long or too short for your setup — or an improper rest adjustment — can create an overdraw situation or other hazardous conditions.
  • When in doubt about an arrow’s condition or fitting, consult a trained professional before shooting.

No products found
Use fewer filters or remove all